DripTech Eco-Flow | Irrigation equipment in Kenya
Venturi fertilizer injectors and farm fertigation kits in Kenya

A Venturi injector uses a pressure differential across a bypass manifold on your irrigation mainline to draw dissolved soluble fertilizer from a mixing tank directly into the irrigation water stream.
How to size and install a Venturi injector manifold
- Match the Venturi size (3/4 inch, 1 inch, 1.5 inch or 2 inch) to the zone flow rate and available pump pressure
- Install the injector on a parallel bypass assembly with a throttling gate or butterfly valve on the main line
- Place a backflow preventer (check valve) upstream so fertilizer cannot siphon back into the water source
- Install your primary disc or screen filter downstream (or use a suction strainer on the Venturi hose) so undissolved granules never reach drip emitters
- Flush the drip lines with clean water for 10–15 minutes after every fertigation cycle
Frequently asked questions
Why is my Venturi injector not sucking fertilizer from the tank?
Venturi injectors require a pressure differential between the inlet and outlet. Partially closing the bypass throttling valve on the mainline creates the pressure drop needed to start suction.
Products you can use for this
Drip Tech Drip Tape Connector with Lock NutKSh 13
Drip Tech Drip Tape End CapKSh 14
Drip Tech DripLines KSh 8,000
Drip Tech End Cap 16mmKSh 12
Browse all irrigation products or ask DripTech to size a system for your farm.