DripTech Eco-Flow | Irrigation equipment in Kenya

Irrigation pump and solar PV sizing calculator

Irrigation pump and solar PV sizing calculator - irrigation equipment and farm setup in Kenya

Size any borehole, river/dam suction, or booster irrigation pump alongside its solar PV panel array, controller Voc window, cable gauge, and buffer tank for Kenyan farms.

Calculate hydraulic head, pipe friction, and water demand

Select crop water depth and acreage, emitter or sprinkler block counts, or a direct flow target to determine required flow rate (m³/h) and daily volume.

Model suction, borehole riser, and mainline pipe segments using true inner bore diameters and Hazen-Williams roughness to calculate Total Dynamic Head (TDH), velocity limits, and altitude-adjusted cavitation safety.

Size solar PV strings, cable mm², and match pumps

Select Kenyan regional Peak Sun Hours, thermal/dust derating, PV module wattage, and cold-morning Voc controller limits to size optimal series/parallel solar strings and DC/AC cable gauges.

Compare live matching DripTech borehole and booster pumps or audit any existing pump datasheet against your calculated TDH.

Frequently asked questions

How many solar panels do I need for a 1 HP, 2 HP, or 3 HP borehole pump in Kenya?

Allowing for 10–15% module heat losses plus dust and controller losses, size solar arrays at roughly 1.3× to 1.5× motor power: ~1,100–1,400 Wp for 1 HP, ~2,100–2,500 Wp for 1.5–2 HP, and ~3,200–3,800 Wp for 3 HP. Check string Voc at coldest dawn temperatures against your controller limit.

Why should solar irrigation pumps in Kenya be sized for June–July cloudy weather?

Central Highlands and Nairobi drop from ~5.9 PSH in February to ~4.2 PSH in June–July overcast skies (and coastal farms dip in May–June rains). Sizing arrays and tank storage for the worst cloudy month keeps watering reliable year-round.

How do I calculate Total Dynamic Head (TDH) for drip vs sprinkler irrigation?

TDH adds Static Water Depth, Drawdown, Ground Elevation Gain, Tank Height, Working Pressure Head (1 bar = 10.2 m; drip uses ~1 bar while sprinklers need 2.5–3.5 bar), Filter/Valve losses, and Hazen-Williams pipe friction across suction, riser, and mainline segments.

Can a surface pump pull water over 6 meters vertically in Nairobi or Nakuru?

At 1,500–2,000 m altitude, lower barometric pressure caps safe surface suction lift plus friction around 5.5–6.0 m. Exceeding this causes cavitation; move the pump near water level or choose a submersible pump.

What borehole casing size and submergence depth is safe?

Standard 4-inch submersible pumps require >= 4-inch (100+ mm ID) casings, while 3-inch boreholes fit slim 3-inch pumps only. Hang the pump 5–10 m below dynamic pumping water level and 3–5 m above bottom silt.