DripTech Eco-Flow | Irrigation equipment in Kenya

Solenoid valves, water timers and automatic irrigation controllers in Kenya

Solenoid valves, water timers and automatic irrigation controllers in Kenya - irrigation equipment and farm setup in Kenya

Automatic irrigation controllers and solenoid valves open and close irrigation zones on a programmed schedule, ensuring greenhouses, orchards and landscapes receive consistent water even when staff are away.

Choosing between tap timers, 9V DC battery controllers and 24V AC panels

Irrigation controller and valve options in Kenya
Control typePower sourceBest farm or garden application
Single/dual tap timerAA / 9V alkaline batteriesKitchen gardens, balcony planters and small gravity tanks
9V DC latching solenoid + node9V battery inside waterproof valve boxRemote field blocks with no mains electricity
24V AC multi-zone controller240V mains / solar inverter with transformerCommercial greenhouses, estates, lawns and multi-block farms

Protecting solenoid valves from debris and pressure surges

  • Always install a screen or disc filter upstream of solenoid valves so sand or trash does not jam the diaphragm
  • Use waterproof gel-filled wire connectors inside underground valve boxes
  • Include a master valve or pump-start relay when the controller also starts an electric booster pump

Frequently asked questions

Why won't a solenoid valve close completely after the timer finishes?

Small grit or leaf debris trapped under the rubber diaphragm or in the pilot port is the most common cause. Isolate the water, open the valve bonnet carefully and rinse the diaphragm.

Products you can use for this

Browse all irrigation products or ask DripTech to size a system for your farm.